Financial Responsibility

Like many American kids, I had an allowance.  I received a monthly $10 bill, and combined with the regular birthday/Christmas checks from relatives, created a small sum, locked away in a little green cashbox, awaiting some future purchase that would bring me joy.

Norwest
Norwest Bank, which has since merged with Wells Fargo

Then my mother decided that I should open a savings account, wherein I deposited my entire “fortune”–secured now by a financial institution (Norwest Bank) and FDIC.  I was told that the purpose was to keep the money safe, earn interest, and learn how to save for the future.  In reality, I learned that my money had instead been taken from me, I couldn’t use it to purchase anything, and I couldn’t withdraw it without my mother’s co-signature.  The goal I can only conclude was to teach me how to save money, but instead taught me the futility of wealth acquisition–further exacerbated once mother instituted a fee penalty system for not doing chores, which quickly exceeded the total monthly allowance.  Monthly payday became instead a bitter ritual in which mother produced a ledger, and after reading a laundry list of chores I hadn’t done (which during a month’s time, were chores I didn’t even remember anymore), and concluding I had a negative balance, and subsequently demanded immediate payment.  In the end, she didn’t teach me financial responsibility, she taught me the meaning of unregulated capitalism.  Like…sharecropping almost.  Or wage slavery.  The hopelessness of working under a system designed to prevent any sort of meaningful gain.  It was a useful lesson, but not the intended one.

Les MisérablesIn short, I failed to learn the meaning of money.  It was merely an abstraction, because when I had money I wasn’t allowed to spend it, and what little I had was fleeced from me anyway.  I learned that work was a pointless exercise, and that you couldn’t take anything from me when I had nothing to begin with.  So naturally I felt little compulsion to contribute to the family.  I also dragged my feet when forced to find a high school job.  You can’t motivate someone to play a game they know is rigged.

I didn’t wish to repeat these mistakes with my daughter.  I concluded then that you have to learn how to spend money before saving it, for why work if you can’t enjoy the fruits?  I also believe that the allowance should operate more akin to a business model.  The kid contributes, and so she receives a stipend.  Companies don’t get to fine their employees for oversights.  There are consequences, sure, but they can’t, for the most part, impact the immediate paycheck.  Instead, the employee receives a wage based on the level of contribution and thereby has a stake in the company’s equity.  The kid will have good weeks and bad weeks, but the amount should remain constant until a more thorough review is performed.

And with that, here’s premise 2 (and with it the main story): the stipend must be provided in a manner in which the kid understands.  Cash may be king, but it’s rarely the primary means of storage and/or transaction.  Money is digital.  It’s plastic.  And to further confirm this point, the kid has demonstrated an excellent understanding of gift card balances, while failing to conceptualize paper.  She understands the math, but not the physical.  I concluded that she would need a checking account and debit card.

Yet it’s interesting how truly behind we as a society are in that we expect digital transactions, yet not readily allow children to make these digital transactions.  Some internet research revealed that many banks do not permit children to hold checking accounts because, as minors, they can’t use checks, which are essentially signatory legally-binding agreements to money exchanges.  I could understand that much, but that didn’t explain why I as a 17-year old could still acquire a checking account prior to leaving for college (though it did have to be co-signed by my father).  So what were the implications of using a debit card as a minor?  None that I could find.  I decided to reach out to our primary bank: Wright-Patt Credit Union.

Over the course of 4 emails, I was advised that such an account was indeed allowed:

Wright-Patt Credit Union“This is an account that we offer with certain requirements. Your daughter can have an account in her name as long as she has a government issued ID and a debit card can be issued if a parent or guardian is joint on the account with her. Your daughter and the jointer [sic] member will need to sign a Minor Debit Card Indemnification Form before a debit card can be ordered. This form identifies the joint owner as responsible for the minor’s use of the debit card and overdraft. Since this is a regular checking account it will be able to have online banking, receive direct deposit, and we can set up a special access that will allow you to transfer between your account and hers.”

And that…

“Overdraft can be disabled for the debit card causing it to decline instead of taking the account negative and receiving the subsequent charge, however, the Idemnification [sic] form will still need to be on file.”

Fair enough.  So I would to get her a state ID (https://www.bmv.ohio.gov/dl-id-idrkids.aspx)–something that I had been planning to do anyway.  So one fine Friday afternoon, I took her to the BMV with all the requisite paperwork.  The IDs however were no longer printed on site, so we needed to wait for the US Postal Service.  In the meantime, they issued a temporary ID.  Gambling that this would be sufficient, we drove to the local banking branch.

After a lengthy wait in line, an officer ushered us to her office.  I explained what we were wanting to do, and she reaffirmed that it was indeed allowed, but she couldn’t accept the temporary ID.  We would need to wait.

The ID eventually arrived, and we made the trip yet again.  After waiting in line, another bank officer–a notably much younger one at that, took down our request, but then advised that they didn’t normally open checking accounts for kids until they were teenagers (I wasn’t given an exact age requirement).  I responded that I had already discussed this at length previously and had been given the green light.  She said that she would have to ask her manager, and left.

Upon returning, she confirmed that the decision was a judgment call of the manager on duty, and that she had been advised to not open the account.  As if to appease, she suggested that we open a savings account instead.  Mentally recounting my childhood experiences with a savings account (which I laid out at length above), I declined.  I considered raising a fuss with the manager, but didn’t feel it a good use of my time as I doubted they’d reconsider just because I complained.  Instead, I made a mental note to issue a formal complaint regarding the conflicting information, and left without further discussion.

Day Air Credit UnionI immediately drove to my second bank: Day Air Credit Union.  I initially took my car loan out with them in 2007, and after some initial aggravation with them not processing my proof of insurance paperwork properly–leading to a fight over them purchasing their own auto insurance for me on their behalf and adding it to the loan (this was eventually straightened out)–I had abandoned them until I opened a separate emergency savings account.  They always struck me as one of those “old people” banks–not the most technologically-modern, but willing to cater to specific needs with extreme patience.  I explained my plight to the teller, and she admitted that while she didn’t know if they could accommodate us, the officer would make that determination.

The officer did indeed make that determination, and in our favor.  The kid now has a checking account with a debit card, with weekly direct-deposits scheduled to it.

CFPBSo why exactly did Wright-Patt give us the runaround?  I did some digging along those lines to see where it fell into “fairness”.  But while checking accounts are indeed managed by the CFPB, since it’s not borrowing anything it doesn’t fall under any sort of Fair Lending clause.  And while the decision to open a checking account is based on reporting agencies (https://files.consumerfinance.gov/f/documents/cfpb_consumer-reporting-companies-list.pdf), since the kid would have a complete lack of any checking account history, I suspect that bank instead made a judgment call which fell under the right to refuse service (you know, what casinos do if you win too much).

So be it, I guess.  There were other options, so the ultimate success of the mission soothed the fury of the experience.  And I’m happy to report that the kid has already made some discretionary purchasing decisions, weighing the short-term happiness an overpriced item might have brought against the depletion of the account and the longer-term goal of having money to spend on vacation.

I love it when I’m right.

(Also, up yours, Wright-Patt).

–Simon

LED There Be Light

Aquarium equipment, like all hobby paraphernalia, runs the full price range gauntlet.  And one can certainly make due with cheaper components, save one piece: lighting.  It always amazed me how much a simple fluorescent hood costed, provided it could accommodate multiple lightbulbs (stock units invariably housed a single), and since I required multiples to satisfactorily grow any plants–yet couldn’t afford the units–I was left with a final option: DIY.

Initially, I took that tiny plastic bulb housing and wired in a set of secondary bulb connectors (these were 24″ T8 fluorescents).  And that worked, but was still much too dark.

Then I acquired a second stock fixture, identical to the one I had, bolted the two together, covered the inside with aluminum foil, mounted the ballasts to the back, and affixed a total of 4 bulb connector sets.  I was pleased with my handiwork, and had successfully created a lighting fixture that was considered “medium light” by hobbyists.

Here it sits in the basement, having finally been decommissioned–awaiting disassembly

Each ballast ran to a separate power cord, in turn to staggered plug timers.  Each bulb was also a different spectrum, selected to suit my own preferences.  At one point I even attached a moonlight (clips at left), but it had since burnt out.

Ultimately it worked, but was somewhat…janky?…ghetto?  You get the idea.  It was a hack, and an inelegant one.  I vowed to remedy that.

(Yet it still provided nice lighting, as can be seen in this prior post):

Elusive Photogenics

Technology has advanced somewhat since those days, and a new option, initially also cost-prohibitive, has now become quite affordable: LEDs.  And that, combined with my mid-life salary, left me with little excuse to forestall any longer.  It was time for research.

My requirements were simple.  It needed to be around 2000 lumens (4x 15watt 24″ T8s run 2000-2400 lumens, more or less, and given the bounceback effect from their omnidirectional properties, plus their fading output, 2000 lumens was probably at the high end of what I was getting with my rig), 30 inches, and not plastic (I wanted something a little more aesthetically pleasing).

I found some good candidates, but the aquarium community steered me towards the Nicrew brand, so I ultimately decided on this number:

NICREW ClassicLED Gen 2 Aquarium Light, Dimmable LED Fish Tank Light with 2-Channel Control, White and Blue LEDs, High Output

As a bonus, they make a dual-channel timer/controller for it, so I can stagger the times of the white and blue lights for nighttime, as well as set the blue level intensity.  Here’s what it looks like installed:

Nice and low-profile

It also uses half the energy.

It also probably won’t kill me if it gets wet.

And it looks pretty nice, too.  If you’re looking to upgrade an aquarium light, LEDs are certainly worth consideration.

–Simon

Desperate Times

I never would have predicted that Windows would have gotten so bad that my own wife would choose to abandon it, especially given her disdain for Apple.

But the OS world is not one of strict duality.  And upon my suggestion, she agreed to Ubuntu, convinced with my recommendation (in turn based upon my own recent experiences with it).

The process was essentially the same as the above linked post, so I won’t go into detail again here.  Instead, I’ll just share this picture, and again vouch for Ubuntu with yet another successful experience:

If Windows 10 has made you pine for an adult operating system, and Apple isn’t your cup of tea, then consider the latest Linux distros.  They’re far more user-friendly than they used to be.

–Simon

Barrels of Fun

A couple years back I wrote about the last rain barrel, which in itself was a sequel to the fate of the first rain barrel, which was an acquisition of the Kentucky Bourbon Trail.

The in-laws got us another such barrel (though it be a wine barrel, technically), for Christmas.  And with the sweltering and rather dry summer under way, I made…wait for it…another rain barrel!

And yes–the Blood Price was paid:

–Simon

Foyer

Following the laminate project, a critical area of the floor remained yet to be addressed: the foyer.  Until now, it was also laminate–part of the original install (or, the latest install by the former owner), but hadn’t been extended beyond the immediate entryway, the rest being the original carpet which had been removed in aforementioned prior post.

The flooring situation had been a problem in the winter, as there was nowhere to set wet shoes; but more importantly, with the laminate now fully wrapping around the center of the house, for it to be seamless, it would have to match exactly.  And I knew from the dining room install that it wasn’t going to be.  Therefore, we needed an alternate form of hard flooring for the foyer, and one more appropriate to the type of mess and traffic it would receive.  We decided upon tile.

And so beganeth the research–which was inconclusive.  No one could agree on the proper method.  Was concrete board needed?  Was self-leveling sealer needed?  How much clearance would the cement require?  In the end, an employee at Home Depot gave us a rundown on the proper method (presumably, as I don’t exactly know his level of expertise).  And as I suspected, the amount of clearance would be cutting things close.  We needed a way to reduce the thickness.

Then we stumbled across this:

Like laminate, this was a cheat.  But was it a tacky cheat, or a convincing cheat?  I certainly didn’t want my cheat to be the subject of ridicule as our house’s successors cursed during its removal (mush as I would in regards to whoever installed the flooring I was about to remove).  But I also wanted a working solution, and ceramic tile didn’t seem like it would fit the bill.  So we gambled, and bought the vinyl.

But first, there was this to contend with.

I should have taken more photos, for that would have better conveyed the experience.  Upon removal of the covering laminate, we encountered a sticky rubber tile (for those who’ve worked in food service, it was akin to the texture of those disgusting rollout rubber mats that cover the kitchen floors (and must be cleaned and rolled back up for storage by the busboys each night, I might add)).

But the tiles weren’t the problem.  They chipped up easily enough.  The problem was the adhesive–a thick goopy tar.  And to compound the problem, I opted to use a solvent remover.  And the problem with solvents, naturally, is that they dissolve things into liquids.  So I had taken a solid goo and liquefied it, resulting in a liquid goo flowing and splashing all over everything in the vicinity.  Lovely.

But with enough persistence, and ruined clothing, I managed to remove enough of the adhesive as to be confident that the new tile would lay flat (and actually adhere), though I first left the application of primer to Liz while I had a dozen drinks or so.

Fun part concluded, I aligned and applied the tile, which went off without a hitch (though I was a single tile short and had to send Liz out to the store (the manufacturer’s calculation was almost spot on)).

Part of the reason we went with this tile was that it was groutable.  The idea being, that it would look more natural and seal better.  And it did, ultimately, satisfactorily succeed in both metrics, but first let me chronicle at length the agony that this seemingly simple task inflicted.

Grout is, it seems, little more than premixed concrete.  And while it ultimately cures into a binding mortar, in its uncured state it’s little more than grainy mud.  This means that it doesn’t really stick to anything, least of all the plastic trenches between the tile.  And, since part of the benefit of the vinyl tile was to have a reduced thickness, there was very little depth in which to scrape the grout.  The instructions gave a simple account of scooping mortar onto the joint, then scraping off whatever remained on the surface, but in practice, doing so pulled the grout out of the groove, requiring instead a very gentle and meticulous teasing and brushing of the grout.  The 40 sq ft room took me 5 hours to grout–7 episodes of Life after People, and more bourbon than I’d care to remember even if I could have remembered after all that bourbon.

Replacing the molding was trivial, as I’ve become very accustomed to the process, so no need to recount it.  Here’s the end result:

In conclusion, the tile makes for a very convincing facsimile, as does the adjacent laminate.  I can’t say from experience if it was any easier, and I don’t know if I learned much during the process as it was the first time I grouted and lacked a frame of reference, but I can say that it was significantly more difficult than I expected.

I’m glad it’s done, and I feel better knowing that the combination of sealants will make for a very water-resistant floor come winter.

Leave your shoes in the foyer.

–Simon